By: Ray
From: Bonita Springs, Fl
Date: Apr 03, 2015
QUESTION
Floor is level, but scale is rocking?
How do you adjust the leveling?
Scale does not flash after step on and then step on?
ANSWER
Hi, you may want to try removing the batteries then putting them back in. If this does not help, you can contact the manufacturer at 1-866-843-3905 and a Taylor representative will gladly assist you. They should also be able to help you with the rocking issue you are having. Thank you.
By: www
From: cali
Date: Dec 27, 2014
QUESTION
I followed the instructions several times on how to calibrate this scale #7519 but am getting a reading that says 0_Ld. Please advise. Thank you!
ANSWER
Hello, since this product is still not working even after calibration, we would recommend contacting the Taylor Precision Products manufacturer directly at 1-866-843-3905. They will be able to help you determine the error and provide steps for solving the issue. Thank you!
By: lawrence
From: hagan georgia
Date: Jun 06, 2014
QUESTION
Howtocalibratethetaylor7519scale
ANSWER
Hello, according to the manufacturer the following steps are the reset procedure and normally fix any errors or issues with the product.
1) Remove the battery from the scale
2) Set the scale on the floor (no carpet) without the battery in place
3) Stand on the scale for 10 seconds (still without the battery)
4) Carefully replace the battery without pressing any buttons or activating the scale
5) Set the scale on the floor (no carpet) with the battery in place
6) Using only one foot, tap the scale or apply just enough pressure to turn on the display. Immediately remove your foot. It should show dashes or zeroes.
7) Let the scale turn off
8) Step on the scale for a weight reading
Thank you! If you have further concerns with your product, the manufacturer can be reached at 1-866-843-3905.
By: Bonnie
From: north attleboro ma
Date: Feb 05, 2013
QUESTION
I bought the scale last week, the numbers do not completely light up and are hard to read. I changed the batteries and that did nothing. What should I do
ANSWER
Hi. The Taylor® Precision Glass Platform Digital Bathroom Scale has a backlight display, which makes it easier to read the numbers. The numbers don't actually light up, but are made to read easier with the backlight. If you would like more information or servicing, please read the manual in the "Literature" tab of this product page for how to contact Taylor. Thanks!
By:
From:
Date: Apr 20, 2011
QUESTION
How do I calibrate my scale? It does not seem to be weighing correctly.
ANSWER
Please look at the manual listed under the literature tab for assistance. If you continue to have problems, please see the information in the manual about returning the item to the manufacturer.
Thank you.
By: JoeB
From: arnprior ont ca
Date: Feb 17, 2011
QUESTION
is there a way toadjust the scale?
ANSWER
If you are wondering how to change to kilograms or stones there is a setting by the battery case.
By:
From:
Date: Jun 15, 2010
QUESTION
I have an old Talor scale that reads 100.5 or 100.00 is there an updated one that is more corect
ANSWER
This scale will display the weight as 100.0. Please feel free to look through our website to see if there are any different style of scale that would be better for what you are looking for.
Thank you.
By: LOVELY
From: CHICAGO
Date: Apr 01, 2010
QUESTION
HOW DO U GET THE SCALE TO WORK AGAIN AFTER CHANGING THE BATTERY?
ANSWER
Try stepping on the scale, disregard the reading, and then step off. This should "reset" the scale for proper use.
Thank you.
By: bald eagle
From: Tn
Date: Jan 20, 2010
QUESTION
Does this scale change numbers if you move or shift your weight while standing on the scale? Accuaracy and depoendability are important to me.
ANSWER
No, this scale takes three seconds to compute the weight then it displays the wheight.
We'll never sell your info to a third party. Opt out any time.
