• Home
  • Comark PDT300 58° - 300°F Waterproof Digital Thermometer

Comark PDT300 58° - 300°F Waterproof Digital Thermometer

Item #: 113266
Model #: PDT300
Manufacturer: Comark

This Comark pocket thermometer has a compact, slim pen style with a thin probe tip for fast response. This thermometer is waterproof and can withstand constant use in wet of humid conditions.

$20.74
Availability

In Stock

 Each
Add to Cart

Description
+ -
This Comark pocket thermometer has a compact, slim pen style with a thin probe tip for fast response. This thermometer is waterproof and can withstand constant use in wet of humid conditions. This digital pen#style pocket thermometer features waterproof casing and a temperature range of #58°F to 300°F (#50°C to 150°C). Its slim tip narrows to a 1.6mm point to produce response times under six seconds, and this thermometer also features a data hold function to freeze current readings. This thermometer meets FDA guidelines to test thin foods.
  • Waterproof
  • Response time better than 6 seconds
  • Probe tip reduced to 1.6mm
  • °F/°C switchable
  • NSF approved
  • BioCote® antimicrobial protection
  • Temperature Range: #58° to #43;300°F / #50° to #43;150°C
  • Field calibratable
  • Battery Type: LR44 1.5V Button Cell
  • BioCote® Antimicrobial Protection
  • Model #: PDT300
  • Hazmat: No
  • Oversize: No
  • NSF Approved: Yes
  • Country Of Origin: China
  • Each Weight: 0.1
ABOUT COMARK

Comark is a leading international manufacturer of high quality, precision thermometers, pressure, airflow, humidity and pH meters, data loggers and wireless monitoring solutions for the food and pharmaceutical industries. Comark also supplies other industrial sectors including healthcare, scientific research, laboratories, HVAC and refrigeration.

Literature
+ -
Attachments (  1 - 2 of 2  )

Reviews
+ -
Write a Review
By: Larry the Tester
From: Matoaka, WV
Sep 18, 2011

Comark PDT300 58° - 300°F Waterproof Digital Thermometer
I use this to measure the ambient temp. and the temp of concrete. It is used on a daily basis as many as fifteen times in concrete. Have had for a year+ now and hasn't failed me yet. Is completely weatherproof as I clean it after each reading with water by just a quick submersion rinse and then a dry rag. Have had other products but not as good as this one. Will highly recomend to anyone.

Primary Use:Government
By: Food Dude
From: MA
Jan 06, 2012

Comark PDT300 58° - 300°F Waterproof Digital Thermometer
Using this item for inspectional services division of our company for municipal inspection contracts.

Primary Use:Government
By: Real chef
From: Portland
Jun 28, 2012

Comark PDT300 58° - 300°F Waterproof Digital Thermometer
Very long lasting. Mine lasted over 2 years. Not one of those that breaks in about 2 weeks. Well worth the money.

Primary Use:Restaurant
Q & A
+ -
Ask a Question
By: naylojo
From:

Jun 16, 2010
QUESTION
how fast is take to read

ANSWER
It takes 6 seconds or less to read.
By: jake
From: elk grove, ca

Aug 19, 2010
QUESTION
how do i reset the calibration from celcius to farenheit?

ANSWER
In order to change from celcius to farenheit, simply push the on/off button until the display shows it is off. Then push and hold the on/off button again and in the lower right hand corner of the display, you will see the "C" and "F" flashing between the two. When the "F" is displayed, simply let go of the on/off button. Thank you.
By: vicki
From:

Oct 18, 2011
QUESTION
the display screen read OPEN...what does that mean and how do i fix it?

ANSWER
Hi. This means that the cover on the battery compartment is not closed all the way. Please check to make sure that it is fitted correctly.
By:
From:

Oct 28, 2011
QUESTION
change comark pdt300 Celcius to Farenheit

ANSWER
Yes, this pocket digital thermometer can change between Celcius and Farenheit.
By: hose
From: Colorado Springs, CO

Nov 20, 2011
QUESTION
I would like some assistance on resetting this thermometer to Fahrenheit on the display screen. Thank you

ANSWER
Hi. In order to change from celcius to farenheit, simply push the on/off button until the display shows it is off. Then push and hold the on/off button again and in the lower right hand corner of the display, you will see the "C" and "F" flashing between the two. When the "F" is displayed, simply let go of the on/off button.
By: slick
From: desert hot springs ca

Aug 09, 2012
QUESTION
how do I calibrate or recalibrate I should say?

ANSWER
Hi. I'll upload a document into the "Literature" tab and it will show up by tomorrow. But here are the instructions below, too. Thanks! Procedure: 1. Make slush ice. Get at least an 8-oz. container. 2. Crush / grind enough ice to fill the container. Do not use uncrushed ice such as ice cubes. 3. Add tap water to about 1 inch of the top. Do not have water above the level of the ice. 4. Immerse the tip of the thermometer at least 1 inch below the level of the water in the slush ice. 5. Wait for the reading to become stable, normally ±2ºF of 32ºF. 6. Press and hold the D-H key for 8 seconds to begin calibration. 7. CAL will be displayed for 2 seconds, and calibration at 32ºF is completed. 8. Remove the thermometer from the ice water and continue to take measurements.
By: Jacqueline
From: United Fruit & Produce-St. Louis Mo 63102

Oct 08, 2012
QUESTION
Our audit requires that we have a calibration method( SOP) from the manufacturer. Where can I find one for the Comark PDT300? Thanks for any help you can provide.

ANSWER
Hi. There is a calibration manual that has detailed instructions, and it is available to download in the "literature" tab of this product page. If you need further assistance, please see the links below and contact Comark. Thanks! http://www.comarkinstruments.com/calibration_and_certification.tpl http://www.comarkusa.com/contact.tpl
By:
From:

Feb 01, 2013
QUESTION
How do you get it back to farhenite from celcius?

ANSWER
Hi. In order to change from celcius to farenheit or vice versa, simply push the on/off button until the display shows it is off. Then push and hold the on/off button again and in the lower right hand corner of the display, you will see the "C" and "F" flashing between the two. When the "F" is displayed, simply let go of the on/off button. Thanks!
By: john
From: woodbridge, va

Jul 21, 2013
QUESTION
How do you change the battery?

ANSWER
Hello, according to the manufacturer the back of the thermometer removes to expose the battery for replacement. To open it, stick an item (such as a penny) in the hole on the back of the thermometer, and give it a quarter-turn. They said that it is a gasket opening, so it may not just pop right open. Replacement batteries are item #301110. Thank you!
By:
From:

Aug 21, 2013
QUESTION
I've attempted several time to calibrate my PDT300 according to the instructions on this site, and each time after "CAL" flashes for a few seconds, the display reads "Err." What next?

ANSWER
Your best bet would be to call Comark directly so they can walk you through it. The contact number is (800) 555 6658.
Accessories
+ -
Coordinate
Parts
+ -
Coordinate
Pattern
+ -
Coordinate
Video
+ -
  • © 2017  Wasserstrom Restaurant Supply. All rights Reserved.
  • Wasserstrom is an Equal Opportunity Employer. | Privacy Policy