Star® 872TSA Ultra-Max Snap Action Thermostat 72" Gas Griddle
Item #: 115399Model #: 872TSAManufacturer:
Star Manufacturing
This product is currently not available.
Star® Ultra-Max® stainless steel gas griddles provide excellent results whether you are cooking eggs or chicken. A highly polished surface provides even cooking results every time. This model provides snap action thermostat temperature control.
Star® Ultra-Max® stainless steel gas griddles provide excellent results whether you are cooking eggs or chicken. A highly polished surface provides even cooking results every time. This model provides snap action thermostat temperature controls for accurate control. This griddle features a "Euro-style" design and ergonomic front control panel. There are 30,000 BTU burners every 12". Ultra-Max® gas griddles have a front grease trough and grease chute for easy clean-up. Standard Features:
All-welded stainless steel construction
Direct spark ignition
Cool-to-the-touch stainless steel bull nose front
Heavy-duty metal knobs
Electronic flame monitoring
Highly polished stainless steel cooking plate
40,000 BTU burners every 12"
Spatula wide 3-1/2" front grease trough and grease chute
6 qt grease drawer
4" adjustable legs
Additional Information:
Grid Area: 1719 sq. in
Weight: 666 lbs.
Ship Weight: 785 lbs.
Width: 72"
Depth: 32-3/8"
Height: 18"
180,000 BTU/hr
3 Year parts and labor warranty
Made in the USA
UL Gas Fired Listed for U.S. and Canada and UL classified to NSF Standard 4 Sanitation
QUESTION why do i have to light each propane station buy hand when i hold in the button to light each pilet by it`s self?
ANSWER According to the Operation Manual (can be found on this product page's Literature tab), it says that all the other pilot lights will be lit.
4. Move Lighter up to the pilot.
5. Put your other hand under the front of
the griddle and press the button on the
safety valve.
6. Once the pilot is lit, remove the lighter and
continue to press the button for at least
30 seconds. You only need to light one
pilot.
7. Once pilot remains lit, turn the power switch
"ON" and turn all knobs to the "ON" position.
This will light all other pilots.