This digital pocket test thermometer is waterproof and features a reduced tip that gives quick readings without damaging delicate food products. The digital thermistor sensor means no risk of a mercury spill, plus it is guaranteed accurate for life. This thermometer has a measurement range of -40°F to 450°F, as well as an adjustable temperature alarm and auto shutoff features that turns it off after 10 minutes of non-use to conserve battery life.
-40°F to 450°F temperature range
Reduced tip for delicate products & quick response time
Adjustable le temperature alarm
Maximum & minimum temperature memory, plus hold mode
F/C switchable
Accurate for life
Auto off after 10 minutes of non-use
IPX7 waterproof rating - dishwasher safe
Anti-microbial additive in housing
Thermistor sensor type
4.75" shaft length
0.046" shaft diameter
Uses 1.5V LR44 battery, 500 hours battery life
Model #: DFP450W-0-8
Attention California ResidentsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.p65warnings.ca.gov. For more information visit www.p65warnings.ca.gov.
QUESTION Product DFP450W: Is there a way to 'reset' the mode button? It seems the mode button is defective as the other buttons work fine.
'HOLD', 'MAX' and 'MIN' aren't appearing when the button is pushed. Is it possible to see those modes before actually taking a temperature? Could this be why the 'mode' button doesn't seem to engage on a consistent basis??
ANSWER Hello, on the product page for item #317276 under the Literature section is a product manual. It has information on holding the current temperature, recalling the highest/lowest temperature, changing temperature settings, max/min functions, mode functions, etc. If you are still having issues after these steps have been taken, we would recommend contacting the Cooper-Atkins manufacturer directly at 1-860-349-3473. They will be able to give you step-by-step assistance on solving the issue and let you know whether your device has become defective. If so, our customer service department can be reached at 1-866-634-8927 for assistance with ordering a new product. Thank you!
By: genever From: philippines Date: Oct 04, 2016
QUESTION I already have 4 units of cooper 450 but its not functioning anymore. Where can I bring it for repair?
ANSWER Hello, we would recommend contacting the Cooper-Atkins manufacturer directly at 1-800-835-5011 and/or info@cooper-atkins.com about product repairs; they will be able to tell you of local shops where you can get it repaired, or where to send the product to for repairs. Thank you!
By: ram From: elyria, oh Date: Oct 06, 2015
QUESTION Just came across model DFP450, from the 90's when I was involved with a restaurant. Put new battery in (it works. no idea how to use.
ANSWER Hello, I suggest you contact the manufacturer, Cooper-Atkins, at (800) 835-5011. Their tech support number is (860) 347-2256, Option 2. You can also email them at Info@cooper-atkins.com. Thank you!
By: Bobby From: Harleysville, PA Date: Sep 21, 2015
QUESTION Based on Manufacture recommendations, how often should the thermometer be checked for calibration, daily or weekly?
ANSWER Hello, this thermometer is listed as being accurate for life and never needing calibration. If you are questioning the readings of your thermometer, the Cooper Atkins manufacturer can be reached at 1-800-835-5011. Thank you!
By: jill From: tustin, ca Date: Jan 30, 2015
QUESTION I am getting different reads when i calibrate these thermometers. I put 3 thermometers in the same glass of ice water and they read (33.8, 32.0, 34.1). My question is, is there a reset button that I am just not seeing. Thank you so much for helping me with this!
ANSWER Hi, on the "Literature" tab of the product page, there is a manual with calibration instructions. If this does not help, you may want to contact the manufacturer for further information. They should be able to guide you through the calibration process. Cooper Atkins can be reached at 1-800-835-5011 or at info@cooper-atkins.com. Thank you.
By: Pam From: Grand Forks ND Date: Jan 16, 2015
QUESTION Why does it go to hold, and how do I get it to not do that...the only way I can chsnge that hold mode is by shutting it off.
ANSWER Hello, according to the manufacturer you should try pressing the Mode button three times once the Hold feature is displayed. If this does not fix the problem, the Cooper-Atkins manufacturer can be reached directly at 1-800-835-5011. They will be able to walk you through the issue if it keeps happening. Thank you!
By: Super G From: Grand Marais Mn Date: Jan 07, 2015
QUESTION Do these give instant temp for temp to check a steak if not what model will
ANSWER Hello,
This thermometer gives one second temperature updates.
Thanks!
By: PORKEY From: KABUL, AFGHANISTAN Date: May 03, 2014
QUESTION How do you calibrate a Cooper Atkins DFP450W-0-8 -40 to 450°F Pocket Thermometer?
ANSWER Hello, according to the manufacturer this thermometer is accurate for life and never requires calibration. It has a lifetime warranty, so if you're finding that the thermometer does not seem to be accurate, we would recommend contacting the Cooper-Atkins manufacturer directly at 1-800-835-5011. Thank you!
By: Heidi From: Mitchell, SD Date: Mar 21, 2014
QUESTION I work for a non profit that provides residential supports for people with disabilities. Per the health inspector--I am looking for a thermometer that will test the water temperatures of our dishwashers (they are not commercial grade--just regular dishwashers like you or I have in our homes). My question is--how would I do this? Do you put the device before you start your dishwasher and start it, or do you need to stop the dishwasher during its cycle and test the water? I want to make it easy for staff to use, so that it does get used. Thank you
ANSWER Hi, this thermometer is able to store the maximum temperature registered so it can be left in the dishwasher the entire time. Thank you.
By: bill From: , decatur, il Date: Jan 23, 2014
QUESTION do you have an instruction sheet describing this product?
ANSWER Hello, a specification sheet will be uploaded for this product and will be able to be seen under the Literature tab. Thank you!
I work around fish ponds & take water temps. Like that it is waterproof, but would like for the probe cover to float, so I never drop it from a boat & lose it at bottom of a lake. Numerals could be larger for older people, but you can't have everything. Like that it fits in my pocket. My biggest problem (with my last one) was with people admiring it so much that when I turn my back, it's gone! Oh yeah, numerals could light up like a Timex digital watch. Really like your products...
Primary Use: Government
By: Jenn From: Huntersville NC Date: Sep 17, 2011
great product for the price! Water proof, and has a life time warranty!
Primary Use: Government
By: Coffee Boy From: Boston Date: Aug 24, 2011
I use this daily to test water temps in coffee brewing equipment. I like the simple, easy to use push buttons. The probe could stand to be a bit longer but that's a minor gripe